Tools Required:

Wet Extraction Machine (Our recommendation: EDIC’s Bravo Spotter). Steam Air Blower (Our recommendation: EDIC’s Aviator or Aqua Dri).

Stain Magic

Aqua Dri


Chemicals Required

Dual Chamber Spray

Power Gel


DCI Light

Stain Magic


  • Apply the diluted 1sTÆiD solution (1:16 ratio) with a spray bottle directly on the stain.
  • Agitate gently but thoroughly to dissolve contamination.
  • Using a wet extraction machine rinse and lift the dissolved contamination
  • Repeat the above three steps.
  • If you do not achieve the desired results, then proceed to the following, otherwise go to step written in italic.
  • If the stain still shows, after blot drying the carpet as much as possible,use a dual chamber trigger sprayer and apply Stain Magic (mixed solution) to the carpet.
  • Allow up to an hour for dwell time. The stain will disappear gradually.
  • Wipe the contaminated area with a clean terry towel to blot dry.
  • If stain still shows repeat the above three steps.
  • Very thoroughly rinse clean using cold or room temperature water in extractor.
  • Use a dry clean terry towel to pick up whatever moisture was left by extraction.
  • Place Air Blower to fully dry the carpet.