Milk

Procedure

• Apply the diluted 1sTÆiD solution (1:16 ratio) with a spray bottle directly on the stain.
• Agitate gently but thoroughly to dissolve contamination.
• Using a wet extraction machine rinse and lift the dissolved contamination
• Repeat the above three steps.
• If you do not achieve the desired results, then proceed to the following, otherwise go to step written in italic.
• If the stain still shows, after blot drying the carpet as much as possible,use a dual chamber trigger sprayer and apply Stain Magic (mixed solution) to the carpet.
• Allow up to an hour for dwell time. The stain will disappear gradually.
• Wipe the contaminated area with a clean terry towel to blot dry.
• If stain still shows repeat the above three steps.
• Very thoroughly rinse clean using cold or room temperature water in extractor.
• Use a dry clean terry towel to pick up whatever moisture was left by extraction.
• Place Air Blower to fully dry the carpet.